ZH1962-E injection syringe needle conical joint multifunctional comprehensive tester

Update: 2018/10/10      View:
  • Brand:    yuanzi
  • Type:    ZH1962-E
  • Order Online
Introduction

The syringe needle cone joint performance comprehensive tester is designed and manufactured according to the relevant provisions of "GB/T1962.1-2001 syringe, syringe needle and other medical equipment 6% (Ruhr) cone joint Part 1: General Requirements". It is specially used to test the leakage, leakage, separation force, stress cracking and other properties of the cone joint. Dedicated test equipment.

ZH1962-E syringe syringe syringe needle cone joint performance tester is designed and manufactured in accordance with the relevant provisions of "GB/T1962.1-2005 (idt ISO594-2:1998) syringe, syringe needle and other medical devices 6% (Ruhr) cone joint part 2 locking joint", and is specially designed for testing 6% (Ruhr) cone joint leakage. Special testing equipment for gas leakage, separating force, spinning torque, easy assembling, anti-skid wire, stress cracking and other properties.

ZH1962-E tester is composed of intelligent controller, LCD screen, stepper motor, stepper motor driver, drive mechanism, sensor, fixture, printer and so on. The screen is displayed in full Chinese menu with touch screen and button double operation. It is more convenient to operate, more stable performance, setting, real-time display of test force value, retention time, and has the advantages of complete functions and clear display.

5.7 inch (120 * 90) monochrome LCD touch screen and Chinese menu display. The nominal capacity of the syringe is selected by the keyboard, and the axial force and torque applied by the assembly are displayed during the test. The values of retention time, internal water pressure, separation force and leakage rate can be printed out by the airborne printer. Fully meet the requirements of GB/T 1962.1 and 2. Several indicators such as leakage, leakage, overload, separation force, stress and assembly can be measured.

The axial force is 1N~30N, and the error is not greater than 0.2N.

The internal pressure is 200kPa~400kPa, and the error is not greater than 5kPa.

The separation force is 1N~30N, and the error is not greater than 0.2N.

The holding time is 1~60s, and the error is not greater than 1s.

Torque: 0.1N M

Nominal capacity: 1mL~60mL optional.

Net weight: 20Kg

Outline size: 440 x 350 x 384 (mm)

2. technical parameters:

2.1 environment:

Working temperature: 5 C ~ 40 C

Relative humidity: 45% ~ 80%

Supply voltage: 220V + 22V

Power grid frequency: 50Hz + 1Hz

2.2 technical indicators:

The axial force range is 20N to 40N, and the calibration error is not greater than 2% of the reading.

The torque range is 0.02N. M to 0.16 N. M, the error of calibration is not greater than 2.5% of the reading.

The internal pressure is 300kPa to 330kPa, and the calibration error is not greater than 2% of the reading.

More Products
友情链接:    斗鱼彩票网址   即刻棋牌 - 服务最好的平台   乐宝彩票app   mc赛车属于哪个国家   即刻棋牌 - 服务最好的平台